Octa-Bubbler® is a pressure compensating device with a 1/2 in FPT inlet and 8 swivel port 3/16 in outlets. Constructed using ABS plastic. Built-in back flow prevention engineered for added protection. Octa-Bubblers deliver water to multiple locations. Optional port plugs are available for unused ports. Available flow rates are 2 GPH 6 GPH and 10 GPH; 20 GPH using a flow control device. Pressure compensation range is 20—60 PSI.
The Hydro Flow® Rain Ring® is a great solution for automating your garden. Its versatility allows you to effectively water soil as well as hydroponic growing media without using small irrigation lines and drip stakes. The Rain Ring® has several strategically positioned distribution holes to fully moisten your grow media. Its heavy duty construction allows them to be used indoors under HID lighting and in full sun outdoor applications. Soak and rinse between cycles for years of trouble free use.
Netafim Single dripper stake assemblies will reduce set up time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 0.3 or 0.5 gph pressure compensating emitter with CNL check vale 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi.
"""Jetstream™ is a top watering, drip method using four gallon per hour emitters for a no clog feed. Top feed gives the grower greater flexibility with larger configurations and less water than flood systems. Trays come equipped with professional tub outlet drain fittings, and removable screens. The Jetstream™ comes standard with 6"""" wide trays. 8"""" trays are available with lids drilled for pots and different drip/spray emitters."""
Turbogarden™ has a large nutrient reservoir (25 gallon) which contains a mineral rich nutrient solution. Periodically, the nutrient solution is pumped up to the top grow tray to water and nourish the plants until the grow media and roots are adequately hydrated. The timer will then shut off the pump, the solution drains back to the reservoir, and the process starts all over again in a few minutes or a few hours later. To maintain the hydro garden, simply top off water, add nutrients at one qu
The Self Piercing Emitters with a sharp barb makes it easy to install no tools required. Optional insertion tool is available #747542. These emitters have a 1.74 psi internal check valve that helps prevent low emitter drainage holding back up to a 3.9 ft column of water. Prevents contaminants from being drawn into the emitter. The Self Piercing Emitters are pressure compensating and delivers the same flow from 10.15 to 58 psi. Exclusive TurboNet® flow path design regulates flow and provides con